山东中德机床附件有限公司
地址:山东省庆云经济开发区富源路1号
电话:0534-3229867 3866606 3866607 0534-3866608 3866609
全国免费电话:15963399879
传真:0534-3229967
客户服务热线:0534-3167765

机床垫铁

您现在的位置:首页 > 产品展示 > 机床垫铁

S78-4系列机床减振垫铁

产品信息

S78-4系列机床减振垫铁
适用范围:
木工、纺织、印染、化工、塑料、电工、食品等一般机械设备。
Application:
Woodworker, Rubber and plastic machines, Spinning machines, Food process machines and etc.

S78-4系列机床减振垫铁产品特点:
1、 安装机床不需埋设地脚螺栓,缩短安装周期,节省安装费用。
2、 根据生产工艺变化,随意调整机床位置,实现生产流水线柔性化设计。
3、 调整机床水平方便,迅速。
4、 隔振、减振,降低噪音。
5、 耐油性,耐腐蚀性强
Feature of product:
1. Machines are stationary on floor without anchors. Therefore the cost and time of installation can be greatly saved.
2. The layout of machines can be changed freely according to the modification of manufacturing process. So it is easy to design the flexible production line.
3. It is convenient and quick to adjust the level of machine.
4. Vibration and noise can be reduced and isolated by using this product.
5. It can resist oil and corrosion greatly.

如何正确选择:
1、确定机床重量及机床基座紧固地脚孔数量。 
2、垫铁承载能力F(kg)>机床总重量(kg) /支撑点个数 
(特殊情况,考虑机床重心位置,确定重量分配)。
3、检查机床基座孔直径、长度是否符合。
How to choose:
1. Decide the weight of machine and the quantity of anchors of machine base.
2. The resisting load of mount F(Kg)>Total weight of machine (Kg)/number of mounts(Think of barycenter of machine and decide allocation of weight)
3. Check if the diameter and length of anchor hole accord with this chart .

S78-4系列机床减振垫铁使用方法:

1、将所需垫铁放入机床地脚下,穿入并顺时针旋转螺栓,使承重盘升起与机床接触。
2、进行机床水平调节(螺栓顺时针旋转,机床升起)。
3、调整机床水平后,锁紧圆螺母,固定水平状态。
注意:因为橡胶的蠕变现象,在垫铁使用两周后,再调节一次机床水平。
How to install:
1. Place the mounts under the anchor hole of the machine. Insert the bolt into the screw hole of mount. And screw clock wise then lift the plate till it reach the machine base.
2. Adjust the level of machine (screw the bolt clockwise then lift the machine ).
3. Tighten the nuts after adjust the level of machine.
Note : The level of machine should be readjusted after two weeks in use because the rubber may creep when it is used firstly.

技术参数及选用表:
Specification and chart for choice:
 


 
型号
外径(mm)
螺纹(mm)
底座高度(mm)
螺栓长度(mm)
总高度
(mm)
可调高度
(mm)
单件承载
(kg)
S78-4-01
80
M12
40
100
110
12
320
S78-4-02
120
M16
48
140
155
14
500
S78-4-03
160
M20
53
180
195
14
1000

山东中德机床附件有限公司 版权所有 鲁ICP备05034652号
地址:山东省庆云经济开发区富源路1号 全国免费电话:15963399879
客户服务热线:0534-3167765