山东中德机床附件有限公司
地址:山东省庆云经济开发区富源路1号
电话:0534-3229867 3866606 3866607 0534-3866608 3866609
全国服务电话:15963399879
传真:0534-3229967
客户服务热线:15853780008

机床垫铁

您现在的位置:首页 > 产品展示 > 机床垫铁

S78-5系列机床减振垫铁

产品信息

S78-5系列机床减振垫铁
适用范围:
小型设备、轻工、食品机械、生产流水线等。
Application:
Small appliances、Light industry、Food Processing Machineries、production line and etc.

S78-5系列机床减振垫铁产品特点:
1、 安装机床不需埋设地脚螺栓,缩短安装周期,节省安装费用。
2、 根据生产工艺变化,随意调整机床位置,实现生产流水线柔性化设计。
3、 调整机床水平方便,迅速。
4、 隔振、减振,降低噪音。
5、 耐油性,耐腐蚀性强
Feature of product:
1. Machines are stationary on floor without anchors. Therefore the cost and time of installation can be greatly saved.
2. The layout of machines can be changed freely according to the modification of manufacturing process. So it is easy to design the flexible production line.
3. It is convenient and quick to adjust the level of machine.
4. Vibration and noise can be reduced and isolated by using this product.
5. It can resist oil and corrosion greatly.

使用方法:
1、将所需垫铁放入机床地脚下,螺杆穿入孔内,用螺母夹持地脚,旋转螺母与机床接触。
2、进行机床水平调节(螺母逆时针旋转,机床升起)。
3、机床水平后,旋紧螺母,固定水平状态。
注意:因为橡胶的蠕变现象,在垫铁第一次使用时,两星期后再调节一次机床水平。
How to install:
1. Place the mounts under the anchor hole of the machine. Put the anchor between the two nuts, Screw the nut until it reaches the bearing plate.
2. Adjust the level of machine (screw the bolt clockwise then lift the machine ).
3. Tighten the nuts after adjust the level of machine.
Note :The level of machine should be readjusted after two weeks in use because the rubber may creep when it is used firstly.
 
技术参数及选用表:
Specification and chart for choice:
 
 
型号
Model
外径(mm)
螺纹(mm)
底座高度(mm)
总高度(mm)
单件重量(kg)
单件承载(kg)
S78-5-01
60
M16
16
97
0.36
200
S78-5-02
90
M16
18
99
0.59
300
S78-5-03
120
M20
20
151
1.13
400

灞变笢涓痉鏈哄簥闄勪欢鏈夐檺鍏徃 鐗堟潈鎵鏈?
鲁ICP备05034652号 椴佸叕缃戝畨澶?7142302000012鍙?/a>
鍦板潃锛氬北涓滅渷搴嗕簯缁忔祹寮鍙戝尯瀵屾簮璺?鍙?br /> 鍏ㄥ浗鍏嶈垂鐢佃瘽锛?5963399879
瀹㈡埛鏈嶅姟鐑嚎锛?5953780008